Inspection Light just came on
- Thread starter MReedBMWM3
- Start date
-Change engine oil and filter while engine is at normal operation temperature.
-Check transmission for leaks.
-Check rear axle for leaks.
-Visually check fuel tank, lines, and connections for leaks.
-Check condition, position, and mounting of exhaust system. Examine for leaks.
-Check power steering system for leaks.
-Check overall thickness of front and rear disc brake pads.
-Examine brake disc surfaces.
-Clean brake pad contact points in calipers.
-Grease wheel center hubs.
-Check steering for absence of play, condition of suspension track rods, front axle joints, steering linkage, and joint disc.
-Check front control arm bushing for wear.
-Check brake and clutch system connectors and lines for leaks, damage, and incorrect positioning.
-Check for free movement of the parking brake cables. Adjust parking brake if necessary.
-Check all tire pressures (including spare). Correct if necessary.
-Check condition of tires (outer surfaces (left/right)), tread wear and pattern; In case of uneven tread wear readjust wheel alignment if required.
-Check thickness of parking brake linings.
-Half-shafts; check for leaks at flexible boots.
-Inspect entire body according to terms of rust prevention limited warranty.
-Check transmission for leaks.
-Check rear axle for leaks.
-Visually check fuel tank, lines, and connections for leaks.
-Check condition, position, and mounting of exhaust system. Examine for leaks.
-Check power steering system for leaks.
-Check overall thickness of front and rear disc brake pads.
-Examine brake disc surfaces.
-Clean brake pad contact points in calipers.
-Grease wheel center hubs.
-Check steering for absence of play, condition of suspension track rods, front axle joints, steering linkage, and joint disc.
-Check front control arm bushing for wear.
-Check brake and clutch system connectors and lines for leaks, damage, and incorrect positioning.
-Check for free movement of the parking brake cables. Adjust parking brake if necessary.
-Check all tire pressures (including spare). Correct if necessary.
-Check condition of tires (outer surfaces (left/right)), tread wear and pattern; In case of uneven tread wear readjust wheel alignment if required.
-Check thickness of parking brake linings.
-Half-shafts; check for leaks at flexible boots.
-Inspect entire body according to terms of rust prevention limited warranty.